Verified CTFL-2018 dumps Q&As - Pass Guarantee or Full Refund [Jan-2023]
CTFL-2018 PDF Dumps | Jan 23, 2023 Recently Updated Questions
How Does CTFL 2018 Exam Look Like?
During the ISTQB CTFL 2018 test, the candidates will be answering 40 MCQs within a span of 1 hour. In case English is not your native language, you’ll be given 75 minutes instead of 60. If you get 65%, you’ll have passed it while anything below that percentage means you’ll need to retake the exam to get certified. For the attainment of the indicated score, one should factor detailed revision into their plan. This can involve referring to study guides and other ways like courses that are developed for CTFL 2018 applicants to assist them in getting ready to ace the test. Further discussion will be about the diverse study books that proved to be useful.
Conclusion
The journey towards a great software testing career must begin with a strong foundation. To create it, start with the ISTQB CTFL 2018 exam as it covers various practices associated with the industry such as DevOps, Agile, Waterfall, as well as Continuous Delivery. Thus, passing it to display your competency regarding the field, its best techniques, tools, and relevant theories is the best choice!
NEW QUESTION 13
Testing effort can depend on a number of factors, which one of the following is MOST likely to impact the amount of effort required?
- A. The ratio of developers to testers in the project team.
- B. The predicted number of defects and the amount of rework required.
- C. The responsibilities for testers and developers being clearly defined.
- D. The planned use of a project management tool to schedule tasks.
Answer: D
NEW QUESTION 14
A holiday club restricts those booking the holiday, to people between the ages of 18 and 30 inclusive.
Using three-point boundary values, what ages would be required to test the lower and upper boundary?
- A. 16, 17, 18, 30, 31, 32.
- B. 18, 19, 20, 28, 29, 30.
- C. 17, 18, 19, 29, 30, 31.
- D. 17, 18, 19, 30, 31, 32.
Answer: C
NEW QUESTION 15
Tests have been specified for the latest software release and users have prioritised these.
However, there are some dependencies between tests as shown in the table below (e.g. Test ID. '123' cannot be run until Test ID. '456' has been successfully completed).
Which test execution schedule best meets the prioritisation and dependency conditions?
- A. 1, 4, 3, 5, 2, 7, 9, 10, 6, 8.
- B. 5, 7, 4, 3, 9, 10, 1, 6, 8, 2.
- C. 3, 5, 7, 10, 2, 4, 6, 8, 9, 1.
- D. 6, 1, 2, 9, 4, 3, 5, 7, 8, 10.
Answer: A
NEW QUESTION 16
A car insurance policy has 3 rates of insurance depending on the age of the driver. For drivers aged between
17 and 25 inclusive they are charged at rate A, drivers aged between 26 and 50 inclusive are charged at rate B and those drivers aged over 50 are charged at rate C.
You are designing test cases, which of the following three ages would test all valid equivalence partitions and therefore test rate A, B and C?
- A. 20, 35, 65.
- B. 26, 45, 50.
- C. 10, 21, 55.
- D. 17, 25, 50.
Answer: A
NEW QUESTION 17
Which of the following would NOT typically be covered in a test summary report?
- A. The risks associated with unresolved defects found during testing.
- B. Whether there is any economic benefit in continuing testing beyond the planned date.
- C. An analysis of lessons learned to determine changes for future projects.
- D. Any features of the system that were not tested along with reasons.
Answer: B
NEW QUESTION 18
After a record of poor quality software releases (incorrect menu selection options, new features that do not work, users allowed to change security levels without administrator rights), you have been asked to review the test capability in your company.
You have limited time to do the review before the next project, which type of testing would be MOST appropriate to review first?
- A. Performance testing.
- B. Structural testing.
- C. Functional testing.
- D. Non-functional testing.
Answer: B
NEW QUESTION 19
Testing and Debugging are key activities in the software development lifecycle.
Which of the following are DEBUGGING activities?
a) Designing tests to find failures.
b) Locating the cause of failures.
c) Analysing and fixing the defects.
d) Executing tests to show failures.
- A. c and d.
- B. a and d.
- C. a and b.
- D. b and c.
Answer: C
NEW QUESTION 20
A student needs to score at least 50 points to pass. If they score at least 100 points they will achieve a merit and if they score at least 150 points they will achieve a distinction.
Which two values are in the same partition?
- A. 50 and 60.
- B. 45 and 55.
- C. 45 and 170.
- D. 55 and 120.
Answer: A
Explanation:
Explanation
NEW QUESTION 21
Which option BEST describes how the level of risk is determined?
- A. The likelihood and the probability of a hazard occurring.
- B. The impact of an adverse event multiplied by the likelihood of that event occurring.
- C. The likelihood of an adverse event happening multiplied by the cost of preventing it.
- D. The consequences of potential problem multiplied by the cost of possible legal action.
Answer: B
NEW QUESTION 22
Which of the following is a typical characteristic of the WALKTHROUGH review type?
- A. Attendees must prepare before the meeting.
- B. Entry and exit criteria are defined.
- C. Metrics are gathered throughout.
- D. The meeting is led by the author.
Answer: D
NEW QUESTION 23
Which of the following is an approach that can be used for exploratory testing?
- A. A tester analyses, designs and implements tests based on external rules and standards.
- B. Tests are designed based on the guidance of stakeholders and experts outside the test team.
- C. A tester methodically executes tests from a list of possible failures, based on experience, defect and failure data.
- D. Time-boxed test sessions are created, during which a tester uses a test charter containing test objectives to guide the testing.
Answer: B
Explanation:
Explanation
NEW QUESTION 24
Given the following state transition diagram where SS is the start state:
Which of the following answers describes a test case that only uses valid transitions to exercise all states, using the minimum number of transitions?
- A. SS-S1-S3-S2.
- B. SS-S3-SS-S1-S3-S2.
- C. SS-S3-S2-S1.
- D. SS-S1-S2-S3.
Answer: A
NEW QUESTION 25
During the development of a software change for a system, the developer makes a mistake in his work, which leads to a fault in the code. Unfortunately, the fault is not found by software testing and is released into live.
What is the DEFINITE consequence of this mistake?
- A. Loss of money, time, or business reputation.
- B. The system will fail, causing a defect.
- C. If the defect is executed, the system may fail.
- D. Contractual requirements have not been met by testing.
Answer: C
NEW QUESTION 26
Given the following state transition diagram where SS is the start state:
Which of the following answers describes a test case that only uses valid transitions to exercise all states, using the minimum number of transitions?
- A. SS-S1-S3-S2.
- B. SS-S3-SS-S1-S3-S2.
- C. SS-S3-S2-S1.
- D. SS-S1-S2-S3.
Answer: A
NEW QUESTION 27
Given the following decision tables, what is the expected result for the test case listed below?
Test Case: Purchase a Toaster weighing 9kg for £10.
- A. Must pay in cash, no free delivery.
- B. Must pay in cash, free delivery.
- C. No need to pay in cash, free delivery.
- D. No need to pay in cash, no free delivery.
Answer: D
NEW QUESTION 28
Which of the following are triggers for Maintenance testing?
a) System migration from one platform to another.
b) Retirement of a system.
c) Preparation for an audit of a system.
d) Modifications to a system.
e) Development of a whole new system.
- A. a, d and e.
- B. a, c and d.
- C. b, c and e.
- D. a, b and d.
Answer: B
NEW QUESTION 29
During which stage of the fundamental test process is the testability of requirements evaluated?
- A. Test Execution.
- B. Test Analysis.
- C. Test Planning.
- D. Test Design.
Answer: B
NEW QUESTION 30
You are performing a review of your colleague's test cases based on the following test basis document:
The Test Cases are as follows:
TC1. Success - valid 'User Name' and 'Password'; Customer Menu displayed TC2. Failure - 'User Name' field has blank entry; Error Number 12 displayed TC3. Failure - 'User Id' entered does not exist on database (i.e. unregistered user); Error Number 23 displayed TC4. Failure - 'Password' entered does not match user's password on database; Error Number 24 displayed You are guided by the following checklist in your review:
C1. There must be one test case to cover success
C2. There must be one test case for each error path (e.g. validation failure) C3. Each test case must use terminology consistent with the test basis document (field names, error numbering, etc.) Record a separate defect for each missing test case (checklist items C1 and C2) and for each test case that does not meet checklist item C3.
How many defects should you record?
- A. 4.
- B. 3.
- C. 1.
- D. 2.
Answer: B
NEW QUESTION 31
Which of the following apply to System Testing?
a) May satisfy legal requirements.
b) Can use system specifications as a test basis.
c) Often the responsibility of business users.
d) Main goal is to establish confidence.
e) Should focus on the communication between systems.
- A. b and d.
- B. a and c.
- C. a and b.
- D. c and e.
Answer: A
NEW QUESTION 32
Which of the following are benefits of an independent test team, and which are drawbacks?
a) Independent testers can find different defects.
b) Developers may put less emphasis on quality.
c) Independent testers can be seen as the reason for delayed projects.
d) Independent testers can verify assumptions made during the specification of a system.
- A. a and b are benefits, c and d are drawbacks.
- B. a and d are benefits, b and c are drawbacks.
- C. b and c are benefits, a and d are drawbacks.
- D. c and d are benefits, a and b are drawbacks.
Answer: B
NEW QUESTION 33
......
CTFL-2018 Exam Questions – Valid CTFL-2018 Dumps Pdf: https://exampdf.dumpsactual.com/CTFL-2018-actualtests-dumps.html
